Category: Corrosion Protection

Corrosion Protection Carrier AquaSnap Chiller

Carrier AquaSnap® Model 30RQP Coated by Clean-Air using AerisGuard Corrosion Protection Plus

To extend the equipment’s lifespan, we’ve applied a protective coating of AerisGuard Corrosion Protection Plus. An essential preventative measure for units in highly corrosive and coastal environments.Up to 5 years’ of neutral Corrosion Protection46,000+ hours* neutral salt spray test (ASTM B117-11)CSIRO Validated TestingOil, Alkali and Abrasion ResistantNo effects on heat transferFor the Coil we use […]

Read Full Article
corrosion coating outdoor unit coil

Unit 2 of 2: Coil and Casings Corrosion Coating on an Outdoor HVAC Unit

To extend the equipment’s lifespan, we’re applying a protective coil coating, AerisGuard™ Corrosion Protection Plus BLUE, whilst also coating the outer casings in CLEAR to preserve their appearance.AerisGuard™ Corrosion Protection PlusComplies with MEPS ratingsDurable through weather and movementAvailable in blue or clear46,000+ hrs ASTM B117 salt spray resistance testWater-based polymer coatingFlexible and abrasion resistantProtects Micro-channels, […]

Read Full Article
Aerisguard Cover

Unit 1 of 2: Coil Corrosion Coating on an Indoor HVAC Unit.

While indoor units usually require minimal protection, this particular one is in a highly corrosive industrial environment. To extend the equipment’s lifespan, we’re applying a protective coil coating, AerisGuard™ Corrosion Protection Plus.AerisGuard™️ Corrosion Protection PlusComplies with MEPS ratingsDurable through weather and movementAvailable in blue or clear46,000+ hrs ASTM B117 salt spray resistance testWater-based polymer coatingFlexible […]

Read Full Article
aerisguard hvac protection australia

AerisGuard™️ HVAC Corrosion Protection a must for the tough Australian Climate and Coastal Factors

HVAC Corrosion Protection ~ Outdoor Units: Heat Exchanger Coil and CasingsJoin us as we take you through the steps required to protect outdoor HVAC units from the elements. We disassemble, degrease, clean and dry the units, followed by coating and curing, before final reassembly and repacking. As Aeris Environmental Platinum partners we opt for their […]

Read Full Article

Fan ‘Rustoration’​ Q&A: Good for 10 more years.

Amongst all the amazing work our field team accomplishes are the fan restoration projects. The transformation of these super-size fan units from rust-to-robust is always satisfying to see.This recent project undertaken by Clean-Air’s restoration expert, Craig Bradshaw, was at the iconic Waterfront Place, a building in Brisbane’s premier riverside business precinct. It’s typical example of Clean-Air’s stringent restoration […]

Read Full Article